Eagle Logo  
5-Gallon Quick Start

Important: For highway vehicles, always install Ultraseal into tires that have been previously balanced! Never attempt to re-balance tires with ANY brand of sealant in them!

Installing Ultraseal is an easy process following these simple steps:

  1. Attach hose to pump handle.
  2. Install black bung onto pail.
  3. Install pump into pail through black bung, secure.
  4. Attach Valve Core Remover to pump hose. Make sure hose valve is in "closed" position (right angle to hose).
  5. Attach Valve Core Remover to valve stem, rotate knob until you feel notch. Apply inward pressure on knob, locking shaft flanges onto valve core.
  6. Unscrew valve core, allow air pressure to force valve core into Valve Core Remover.
  7. Rotate hose valve to "open" position (parallel to hose).
  8. Pump in recommended amount of Ultraseal. (Refer to Tire Charts).
1-Gal jug with Pump
  1. Rotate hose valve to "closed" position.
  2. Gently screw valve core back into valve stem. Do not cross-thread.
  3. Detach Valve Core Remover from valve stem.
  4. Attach Valve Core Remover to pail return spout.
  5. Depress pump to return unused sealant to pail.
  6. Re-air tire to recommended p.s.i.